Useful Area 807 mm 1,070 mm
Thickness 0.8 mm - 1.0 mm -1.2 mm -1.5 mm
Gutter Width 76 mm
Groove Depth 18 mm
PORVIL Galvanized illuminated sheets can be produced in single length up to 6 m upon request.
COLORS
Illuminated White, Yellow, Orange, Green, Blue, Yellow
Opaque White, Yellow, Green, Blue
For requests over 1000 M2, special colored production can be made upon request.
AREA OF USE
It is used as a coating material on all kinds of roofs and facades for lighting purposes and/or alone in accordance with galvanized sheet metal profiles. (Factory roof and facade lights, garage, gallery, warehouse, warehouse, greenhouse and market place roof covers, etc.).
USAGE TYPE
Cutting the boards:
The boards can be easily cut with a fine tooth saw, jigsaw or hand saw. It is possible to obtain sheets cut according to the installation dimensions from our company.
Drilling the boards:
The boards are drilled with a drill. The diameter of the drilled hole should always be 1.0 mm-1.5 mm larger than the diameter of the screw used. It is recommended to use sealing elements such as connection gasket, washer cone in order to ensure sealing from the drilled area during assembly. Never pierce the boards with nails.
Installation of the boards:
Boards should be mounted with self-drilling screws and saddles supplied by our company or our authorized dealers.
When starting the installation of the boards, the installation should be started from the opposite side of the wind blowing in the region and from bottom to top.